Changing The Lcd Setting; Initializing Settings - Ricoh RDC-6000 Operation Manual

Changing the LCD Setting

The camera comes up with the LCD monitor enabled when it is powered on in a
recording mode. You may set the camera to have the LCD monitor disabled when it is
powered on, to save the batteries.
q Set the mode dial to [SET].
w Press the
or
SETTING].
e Press the MENU
[OFF].
The camera, when powered on in a recording
mode, will now come up with the LCD monitor
disabled. Press the DISPLAY button to switch
the monitor display. See "LCD Monitor Display"
(p.41).
When the setting is complete, turn the mode dial
to switch to another mode.
• The initial value is ON.
Note

Initializing Settings

You can reset all settings, except for the date.
Important
• Data set by Keep Settings will also be initialized to its factory defaults.
Note
q Set the mode dial to [SET].
button to select [LCD
Change button to select
MENU[SET UP]
LCD CONFIRMATION
LCD SETTING
INITIALIZE SETTING
SEQUENTIAL NO.RESET
ON
Change
MENU[SET UP]
LCD CONFIRMATION
LCD SETTING
INITIALIZE SETTING
SEQUENTIAL NO.RESET
OFF
Change
2/2
2/2
5
99