Using Auto Bracket - Ricoh RDC-6000 Operation Manual

Using Auto Bracket

This function takes three continuous frames: one each at the set exposure and at
–0.5EV and +0.5EV. This feature makes it possible to obtain correct exposure under
difficult conditions.
Mount the camera on a tripod or level surface to prevent the camera from moving.
q Set the MODE dial to [
The Record menu will be displayed.
w Press the up
select [AUTO BRACKET].
e Press the MENU
[ON] [OFF] and press the CANCEL
button
r Press the shutter release button to take the picture.
When the shutter release button is pressed, three frames will be taken at the set
exposure of –0.5EV, 0, + 0.5EV.
Note
• The flash will not fire when Auto Bracket is used.
68
] and then press the MENU button.
or down button to
button to turn
Change
REDEYE REDUCTION
MONOCHROME MODE
INTERVAL MODE
AUTO BRACKET
+/–
EXIT
EXIT
REDEYE REDUCTION
MONOCHROME MODE
INTERVAL MODE
AUTO BRACKET
+/–
EXIT
MENU[RECORD] 2/2
OFF
Change
MENU[RECORD] 2/2
ON
Change