Table of Contents
Advertisement
Changing Image Confirmation Time (LCD CONFIRM.)
Immediately after pressing the shutter release button, the still image taken is displayed for a moment
so you can check it.
At purchase, Confirmation Time is set to one second, but this can be changed.
Possible Settings
OFF (Photo not displayed for confirmation)
1 Minute (Default)
2 Seconds
3 Seconds
To change Confirmation Time, follow the steps
below.
Turn the Mode Dial to
The Setup Screen appears.
(Setup Mode).
103
Chapter 1 / Section 6 Changing Camera Settings
Press the
button to select [LCD
CONFIRM.].
Press the
buttons to select the desired
setting.
This setting will be used for shooting until you change it.
Advertisement
Table of Contents
