Table of Contents
Advertisement
FV lock
This feature is used to lock flash output, allowing
photographs to be recomposed without changing the
flash level. This ensures that flash output is appropriate to
the subject even when the subject is not positioned in the
center of the frame.
A Select [FV LOCK] or [FV LOCK/LENS DATA] for
[FUNC. BUTTON] under [
in the [SET UP] menu (➝p.138, 168).
B Press the flash pop-up button to raise the flash.
C Position the subject in the center of the frame and
press the shutter button halfway to focus.
BUTTON ASSIGNMENT]
D Press the FUNC. button.
• The flash will emit a monitor preflash to determine the
appropriate flash level.
• Flash output will be locked at this level and FV lock
icons (
and
panel and viewfinder.
E Move the camera to recompose the photograph, then
press the shutter button fully.
If desired, additional pictures can be taken without
releasing FV lock.
F Press the FUNC. button to release FV lock and confirm
that the FV lock icons (
displayed in the control panel and viewfinder.
) will appear in the control
and
) are no longer
Continued Q
85
Advertisement
Table of Contents
