System; Format; Usb Mode - FujiFilm IS Pro Owner's Manual

SYSTEM

FORMAT

Initialize (format) the memory card for use with the
camera.
FORMAT FORMAT
FORMAT OK? FORMAT OK?
ERASE ALL DATA ERASE ALL DATA
OK OK
CANCEL CANCEL
SET SET
A Press n or o to select OK.
B Press MENU/OK to initialize the memory
card.
CAUTION
• The Format function erases all the frames (files),
including protected frames (files).
Back up important frames (files) onto your PC or
another media before formatting your memory card.
• Do not open the battery cover or slot cover during
formatting, as formatting will be interrupted.
How to use the SET UP menu (➝p.138)

USB MODE

Before connecting the camera to a computer via USB
(➝p.194), select the appropriate USB option as
determined by the computer operating system.
[ MTP(PTP)]
Normally selected. Select [MTP(PTP)] to send pictures
to the PC or to use PictBridge. The camera can be
safely detached without eject operation from the PC.
[ PC SHOOT. AUTO]
The camera automatically operates in PC shooting
mode when connected to the PC with the USB cable,
and shot images will be saved to the hard disc in the
PC. When not connected to the PC, the camera
operates normally, and shot images are saved to the
memory card in the camera.
* The images not transferred to the PC will be lost if the
USB cable is disconnected during shooting.
[ PC SHOOT. FIXED]
The camera automatically operates in PC shooting
mode when connected to the PC with the USB cable,
and shot images will be saved to the hard disc in the
PC.
Once the camera is connected to the PC, even when
the USB cable is disconnected during shooting, shot
images will be saved to the camera's memory buffer,
and can be transferred to the hard disc in the PC later
unless the camera is turned off. However in this case,
shot images will not be recorded to the memory card in
the camera.
179