Connecting To A Pc - FujiFilm IS Pro Owner's Manual

Connecting to a PC

By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
"FinePixViewer" performs images saving, browsing and
file management etc.
MEMO
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
When IS Pro is connected to Windows PC, IS Pro is
recognized as "FinePix S5 Pro".
Refer to Software
Installation (➝p.188, 191)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
A Insert the memory card with images into the camera
(➝p.34).
CAUTION
• Do not format the memory card in the camera on the
PC.
• Use the memory card with images taken by a FUJIFILM
Digital camera.
• When connecting to a PC, if the memory card contains
large images, connection or transmission may take time
or images may not be stored.
B Turn the power switch to ON to turn the camera on.
194
CD-ROM
(Software for FinePix CX)
C Select [
MTP(PTP)] for [USB MODE] under
[ SYSTEM] in the [SET UP] menu.
See "Using the [SET UP] menu" (➝p.138).
SYSTEM SYSTEM
FORMAT FORMAT
MTP ( PTP
MTP
USB MODE USB MODE
PC SHOOT. AUTO PC SHOOT. AUTO
FRAME NO. FRAME NO.
PC SHOOT. FIXED PC SHOOT. FIXED
AUTO POWER OFF AUTO POWER OFF
BEEP BEEP
VIDEO SYSTEM VIDEO SYSTEM
D Turn the power switch to OFF to turn the camera off.
E Connect the camera to your PC using the USB cable
(mini-B).
;USB socket
F Set the Power switch to ON to turn the camera on.
HELP HELP
PTP )
LOW LOW
NTSC NTSC