FujiFilm IS Pro Owner's Manual page 216

Warning Displays
Warning Displayed
CANNOT BE PRINTED
CAN NOT USE IN
CURRENT SETTING
ERROR
216
Explanation
Displayed for PictBridge.
• An attempt was made to make a setting for a
multiple exposure picture when [ISO AUTO
CONTROL] was [ON].
• An attempt was made to make a setting for a
multiple exposure picture when the auto
bracketing was active.
• An attempt was made to use live view display
when the auto bracketing was active.
An attempt was made to attach the GPS device
when [BCR 1 SHOT] or [BCR CONTINUOUS] is set
for the [BARCODE READER/GPS] under
[ SHOOTING] in the [SET UP] menu
Remedy
• See the user manual supplied with the printer and
check whether the printer supports the JFIF-JPEG
or Exif-JPEG image format. If not, the printer
cannot print the images.
• Images with CCD-RAW cannot be printed.
• Was the image data photographed using IS Pro?
You may not be able to print some images
photographed by other cameras.
• Select [OFF] for [ISO AUTO CONTROL] under
[ISO AUTO CONTROL] under [SEXPOSURE] in
the [SET UP] menu (➝p.154).
• Make a setting for multiple exposure shooting after
canceling bracketing (➝p.104).
• You can use the live view display after canceling
bracketing (➝p.104).
Turn the camera off briefly and set [GPS] for
[BARCODE READER/GPS] under [
in the [SET UP] menu. Then, attach the device
again.
SHOOTING]