Color; Tone - FujiFilm IS Pro Owner's Manual

COLOR

Sets the density of the color used when shooting images.
SHOOTING MENU SHOOTING MENU
FILM SIMULATION FILM SIMULATION
D-RANGE D-RANGE
COLOR COLOR

TONE

TONE
SHARPNESS SHARPNESS
COLOR SPACE COLOR SPACE
[HIGH]
This setting provides the highest color density.
[MEDIUM HIGH]
This setting provides a higher color density than [STD].
[STD]
This setting sets the standard color density.
[MEDIUM LOW]
This setting specifies a lower color density than [STD].
[ORG]
This setting specifies the lowest color density. Use this
setting for images that will undergo image processing
for use in commercial printing.
[B/W]
This setting converts the colors in the photographed
image to black and white.
CAUTION
• Color can be set if [STD] is set under [
SIMULATION] in the [SHOOTING MENU].
• If you want to view or print the image data directly, do
not select [ORG].
HIGH HIGH
MEDIUM HIGH MEDIUM HIGH
STD STD
MEDIUM LOW MEDIUM LOW
ORG ORG
B/W B/W
FILM
TONE
Use this setting to adjust the contrast of images to be
shot.
SHOOTING MENU SHOOTING MENU
FILM SIMULATION FILM SIMULATION
D-RANGE D-RANGE
COLOR COLOR
TONE TONE
SHARPNESS SHARPNESS
COLOR SPACE COLOR SPACE
[HARD]
This setting provides the highest level of contrast.
[MEDIUM HARD]
This setting provides a higher level of contrast than
[STD].
[STD]
This setting sets the contrast for photographed images
to the standard level.
[MEDIUM SOFT]
This setting specifies a lower contrast than [STD].
[ORG]
This setting specifies the lowest contrast. Use this
setting for images that will undergo image processing
for use in commercial printing.
CAUTION
• Tone can be set if [STD] is set under [
SIMULATION] in the [SHOOTING MENU].
• If you want to view or print the image data directly, do
not select [ORG].
Setting the menu (➝p.108)
HARD HARD
MEDIUM HARD MEDIUM HARD
STD STD
MEDIUM SOFT MEDIUM SOFT
ORG ORG
FILM
113