FujiFilm IS Pro Owner's Manual page 222

Troubleshooting
Matters
Connecting to Cannot print with
printer PictBridge.
Z Others
Matters
Nothing happens
when pressing the
buttons on the
camera.
Camera operation
etc.
The camera no
longer works
correctly.
222
Problems Possible causes
The USB cable (mini-B) is not correctly
connected to the printer or camera.
The printer is not turned on.
Problems Possible causes
Camera malfunction may be caused
temporarily.
The battery has run out.
Camera functions are locked by the
function lock.
Camera malfunction may be caused
temporarily.
Solutions
Set up the camera, and connect the USB
cable (mini-B) correctly.
Turn the printer on.
Solutions
Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again.
Charge the battery or load fully charged
battery.
Unlock the function lock.
Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again. If you think the camera is
faulty, contact your FUJIFILM dealer.
Page
183
–
Page
32,
210
30,
32,
208
169
32,
210