Table of Contents
Advertisement
Z Exposure Bracketing
The camera modifies exposure by varying shutter speed
and aperture (programmed auto), aperture (shutter-
priority auto), or shutter speed (aperture-priority auto,
manual exposure mode).
P:shutter speed and aperture
S:aperture
*1
*1
A:shutter speed
M:shutter speed
*2
1
*
When [ON] is selected for the [ISO AUTO CONTROL]
under [ISO AUTO CONTROL] under [S EXPOSURE]
in the [SET UP] menu, the camera will automatically
vary ISO sensitivity for optimum exposure when the
limits of the camera exposure system are exceeded.
2
*
Can be modified by the [AUTO BKT IN M EXP.MODE]
under [
FLASH/BKET] in the [SET UP] menu
(➝p.165).
*1
MEMO
• In single frame and self-timer modes, one shot will be
taken each time the shutter button is pressed. In
continuous low speed and continuous high speed
modes, shooting will pause after the number of shots
specified in the bracketing program have been taken.
Shooting will resume the next time the shutter button is
pressed.
• If the memory card fills before all shots in the sequence
have been taken, shooting can be resumed from the
next shot in the sequence after the memory card has
been replaced or shots have been deleted to make
room on the memory card. If the camera is turned off
before all shots in the sequence have been taken,
bracketing will resume from the next shot in the
sequence when the camera is turned on.
Continued Q
105
Advertisement
Table of Contents
