FujiFilm IS Pro Owner's Manual page 215

Hide thumbs Also See for IS Pro:
Table of Contents

Advertisement

Warning Displayed
An attempt was made to erase a protected file.
PROTECTED FRAME
An attempt was made to playback images from an
NO IMAGE
empty memory card.
An attempt was made to crop an image whose size
CANNOT CROP
is 2304 × 1536 pixels, or an image shot with RAW
~ CANNOT CROP
setting.
• An attempt was made to crop an image shot using
CANNOT CROP
a camera other than IS Pro.
• The image is damaged.
Prints were specified for 1000 or more frames in the
DPOF frame settings.
DPOF FILE ERROR
CANNOT SET DPOF
An attempt was made to specify DPOF settings for
~ CANNOT SET DPOF
an image that is not supported by DPOF.
The camera is not connected to a PC or printer.
COMMUNICATION
ERROR
Displayed for PictBridge.
PRINTER ERROR
Displayed for PictBridge.
PRINTER ERROR
RESUME?
Explanation
Remedy
Protected files cannot be erased. Remove the
protection (➝p.132).
It is impossible to playback.
The image cannot be cropped.
The image cannot be cropped.
The maximum number of frames for which prints can
be specified on the same memory card is 999.
Copy the images for which you want to order prints
onto another memory card and then specify the
DPOF settings.
DPOF printing cannot be used with this image
format.
• Check that the USB cable (mini-B) is connected
correctly.
• Check that your printer is turned on.
• Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• See the user manual supplied with your printer.
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
Continued Q
215

Advertisement

Table of Contents
loading

Table of Contents