FujiFilm IS Pro Owner's Manual page 196

Connecting to a PC
G Set a PC.
Windows 98 SE / Me / 2000 Professional /
Macintosh
CAUTION
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
• FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
Screen for Windows 2000 Professional
*
MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button, set
the power switch to OFF to turn off the camera and then
disconnect it from the PC.
196
Windows XP / Vista
A The "Found New Hardware" help message appears in
the bottom-right corner of your screen. This message
will close when the settings are completed. No action
is required.
CAUTION
This step is not required for subsequent connections.
B FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button, set
the power switch to OFF to turn off the camera and then
disconnect it from the PC.
Proceed to "Using FinePixViewer" (➝p.198).