Table of Contents
Advertisement
Cleaning the CCD
B Check whether the dust has been removed from the
CCD surface.
- The blower has removed the dust (There are no oily
marks or fingerprints).
RTurn the camera off and mount the lens or body
cap on the camera.
- There are oily marks or fingerprints left on the CCD that
cannot be removed with the blower.
RProceed to stepC.
CAUTION
When you turn the camera off, the mirror drops down
and the shutter closes at the same time. Ensure that
your fingers are not caught inside the camera.
Z Ensure that you have the cleaning equipment
ready
• Cleaning swabs
Sensor Swab (Photographic Solutions, Inc.)
For information on suppliers outside Japan, visit
*
the web site listed below
(http://www.photosol.com/swabproduct.htm).
• Cleaning fluid
Anhydrous ethanol
206
C Moisten the bottom 5 mm (0.2 in) of the Sensor swab
evenly with cleaning fluid.
CAUTION
Do not use the swab when it is dry or not moistened
with cleaning fluid.
D Slowly and gently wipe using only one side of the
sensor swab just once across the full width of the CCD
from left to right.
Advertisement
Table of Contents
