Engine Air Pre-Cleaner; Engine Air Cleaner; Spark Plug; Fuel Filter - Snapper LT120G30DB Safety Instructions & Operator's Manual

MAINTENANCE INSTRUCTIONS
The componentslistedshouldbe servicedon a regular
basisto insurethattheyare intopworkingcondition. R efer
to SERVICE SCHEDULE on Page 14 for recommended
service intervals.
AIR CLEANER
ENGINE AIR PRE-CLEANER
Theengineairpre-cleanershouldbe removedandcleaned
every25 operatinghours.See Figure30. Referto Engine
Owner'sManual for specificcleaninginstructions.
ENGINE AIR CLEANER
The engine air cleaner element shouldbe removedand
replacedevery 25 operatinghours.See Figure30. Con-
tact enginemanufacturer's dealerfor correctreplacement
element.
ENGINE
AIR PRE.CLEANER
\
\
FIGURE 30
FUEL
TANK
SPARK PLUG
Remove and replaceengine sparkplug after 100 operat-
ing hours. Refer to Engine Owner's Manual for correct
replacementplug and gap specifications.
FUEL FILTER
The engine fuel filtershouldbe replaced every100 oper-
atinghours.Remove the fuel filter as follows:
NOTE:
Itmay be necessary to drain the fuel tank before removing
fuel filter to preventexcessivespillageof gasoline.
HOSE CLAMR
Raise tractorhood.
Remove sparkplugwire(s)and secureawayfrom plug(s).
Locate fuel filter. Remove hose clamps and fuel hoses
from bothsides of fuel filter. See Figure31.
NEW FUEL FII
PART No. 1-4359
FIGURE 31
Installnew fuel filtei" part number 1°4359. See Figure32,
Fillfuel tankwith freshgasoline.Refer to EngineOwner's
Manual for fuel specifications.
Reconnectspark plug wire(s).
FIGURE 32
Lowertractor hood.
19