Snapper LT120G30DB Safety Instructions & Operator's Manual page 126

MAINTENANCE INSTRUCTIONS
HYDRO DRIVE MODELS
To be properlyadjusted,the brake shouldstopthe tractor
in approximately 6 feet from top speed when the clutch/
brake pedal is fully depressed.
Adjustbrake when necessary as follows:
Turn engine "OFF'.
Raise hood, remove spark plugwire from spark plugand
secure wire away from plug.
Locatebrake adjustmenton rightside oftractor infrontof
and behind right rear wheel. See Figure74.
Turn nut clockwise to increase braking action or, coun-
terclockwiseto decrease brakingaction. See Figure 74.
Replace spark plug wire, startengine and test brake.
Continue adjustment as described above until proper
adjustmentis achieved.
GEAR DRIVE MODELS
To be properlyadjusted,the brake shouldstopthe tractor
in approximately 6 feet from top speed when the clutch/
brake pedal is fully depressed.
Adjustbrake when necessaryas follows:
Turn engine "OFF".
Raise hood, remove spark plugwire from spark plug and
secure wire away from plug.
Locate brake adjustmenton rightsideof tractorin backof
and behind right rear wheel. See Figure 75.
Turn nut clockwise to increase braking action or, coun-
terclockwiseto decrease brakingaction. See Figure75.
Replace spark plug wire, startengine and test brake.
Continue adjustment as described above until proper
adjustmentis achieved.
\
FIGURE 74
ADJUSTMENT
FIGURE 75
BRAKE
35