Snapper LT120G30DB Safety Instructions & Operator's Manual page 142

OPERATING INSTRUCTIONS
_-'lmmr.1 :_m nlI _[rt::lE._m go] ..J..J I _[it L', [ olV,'J=1 :l :| mF_,l p]=l
STARTING MOWER BLADE
Start engine.
PULL BLADE ENGAGEMENT
LEVER UP TO "ON" TO
START MOWER BLADE(S)
ON
Raise blade engagement lever to "ON". See Figure 12.
STOPPING MOWER BLADE
Move blade engagement lever to "OFF". See Figure 12.
I_-.1 :a / dI ,_[rl:Ji :t :1al:f.!,.-] I _' [ rll ".,/:I:t [1:1 ::El [4 ::1
SETTING PARK BRAKE
ENGAGEMENT
LEVER
FIGURE 12
PEDALALL
PARK BRAKE
LEVER
Fully depress clutch/brake pedal.
Move park brake lever up into slot. See Figure 13.
Release clutch/brake pedal.
RELEASING PARK BRAKE
Fully depress clutch/brake pedal. The park brake lever
will release automatically.
MOVE PARK
LEVER"UP"TOENGAGE
PARK BRAKE
FIGURE 13
I :{o] ! q I _[ttl /; f-Till I[Ol :llV,'| 1111: I =1 _[d I _I ::l[o] d =1
ROLLING HYDRO MODELS
ROLL RELEASE --
CONTROL
With engine "OFF", move to rear of tractor.
Move the roll release control to the right and down. This
disengages the hydro transmission. See Figure 14.
Move tractorto desired location.
Moveroll release controlup andtothe leftto engage hydro
transmission
Set park brake.
NOTE:
The transmission will not propel the tractor if it is left in the
"ROLL" position.
\
\
\
ENGAGED
POSITION
FIGURE 14
POSITION