Tension Adjustment Assembly - Grizzly G0514X Owner's Manual

Blade Guide Rack and pinion
Lubricant frequency
Multi-purpose as needed
gl2 grease
To lubricate the blade guide rack and pinion:
1. disConneCt BandsaW FroM poWer!
2. lower the blade guide until it reaches the
table.
3. using a rag and mineral spirits, wipe off any
existing grease and sawdust buildup on the
rack (see figure 91).
figure 91. example of rack lubrication location.
4. apply a thin coat of multi-purpose gl2 grease
to the rack.
5.
Move the blade guide up and down several
times and remove any excess grease to help
prevent sawdust buildup.
G0514X/-X2/-X2B/-X3 (Mfg. Since 2/12)

Tension Adjustment Assembly

Qty Lubricant
thin Coat Multi-purpose
gl2 grease
To lubricate the tension adjustment assem-
bly:
1.
2.
3.
4.
frequency
as needed
disConneCt BandsaW FroM poWer!
open the top wheel cover and look through
the top of the wheel.
using a rag and mineral spirits, wipe off any
existing grease and sawdust buildup on the
blade tension adjustment assembly and ten-
sion lever cam.
apply a thin coat of multi-purpose gl2 grease
to the tension adjustment assembly and ten-
sion lever cam (see figure 92).
figure 92. example of tension adjustment
assembly locations (top wheel removed for
clarity).
Qty
thin Coat
-53-