Grizzly G0514X Owner's Manual page 56

Table Tilt Rack and pinion Assembly
(G0514X2, G0514X2B, & G0514X3)
Lubricant frequency
Multi-purpose as needed
gl2 grease
To lubricate the table tilt rack and pinion
assembly:
1.
disConneCt BandsaW FroM poWer!
2. With the table perpendicular to the blade, and
using a rag and mineral spirits, wipe off all
existing grease and sawdust buildup from the
rack.
3. Move the table up to its maximum 45˚ angle
and wipe (figure 93) off all existing grease
and sawdust buildup from the rack.
figure 93. example of lubricating table tilt rack
and pinion assembly.
4.
apply a thin coat of multipurpose grease to
the rack.
5.
Move the table up and down several times
to distribute the grease, then wipe off any
excess grease.
-54-
Trunnion
Lubricant
Qty
Multi-purpose
gl2 grease
thin Coat
To lubricate the trunnion, do these steps:
1.
2.
3.
4.
frequency
as needed
disConneCt BandsaW FroM poWer!
Move the table up until it reaches its maxi-
mum 45˚ angle, and using a rag and mineral
spirits, wipe off all excess grease and saw-
dust from the trunnion.
apply a thin coat of light all purpose grease to
the outside surfaces of the trunnion (figure
94 & 95).
figure 94. trunnion lubrication location
(g0514X).
figure 95. trunnion lubrication location
(g0514X2/g0514X2B/g0514X3).
Move the table down and then back up to dis-
tribute the grease, then wipe off any excess
grease from the trunnion.
G0514X/-X2/-X2B/-X3 (Mfg. Since 2/12)
Qty
thin Coat