Sanyo DS27820 Owner's Manual page 21

ht o t_: I_ie in PIP wit_v
Turnon VCR (or
Do you see PiP picture now?
other Auxiliary Yes. VCRwasturned off / PiP not selected.
equipment) and No. ConnectAnt,/Cable to TV 75 ohm connector and Video cable from VCRVideo
press PiP key
on out to the TVVideo In (or confirm that these connections are correct).
remote control.
PiP wit_dow ot_d _c.reen h_ve the same pic t_re
Press the SELECT
Do you
seedifferentpicturesnow?
key to select the
_
Yes. PIP was displaying signal from TV Ant/CaNe instead of VCR.
signal connected
_ No. Change channels on your VCR (or other Auxiliary equipment).
to the AV jacks.
My remote c o,_Jrol w i# not ope_# te my 7elevi#on
Press the TV key Does the remote control work now?
on the Remote Yes. Another mode was selected. Pressthe appropriate key to operate the different
Control. Then try it types of equipment. (Remote must be programmed. Seepages 7~8.)
again. Be sure to
No. Replacethe batteries or confirm that they are installed properly.
point the remote
control at the TV.
My remote c on Jrol wi # n o t ope_ o te my C o b _ Box or o thez o ux i[_2ry
eq_pment
Pressthe AUX key
Doesthe remote control operate the Cable Box or other auxiliary equipment now?
on the Remote
Control. Thentry
it again. (Make
sure the Cable
Box or auxiliary
equipment is
turned on.)
Yes. Another mode was selected. Press the appropriate button to operate the
different types of equipment. (Remote must be programmed. See pages 7~8.)
No. Reprogram the remote control.
The cobir_et
mokes
o poppit_
so_I
• This is a normal condition during the warm-up and cool down of the plastic cabinet parts.
L]$_D
This symbol on the nameplate means the product is Listed by Underwriters' Laboratories
Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire,
casualty and electrical hazards.