Printing A Status Sheet - Epson Aculaser M1200 series User Manual

This is a warning to inform you that the installed developer cartridge is not a genuine Epson
product. The use of such products may damage the printer and cause the print quality to decrease.
Remove the currently installed cartridge and replace it with a genuine Epson cartridge by
following the instructions under "Developer Cartridge" on page 69.
To temporarily dismiss the warning, click Close on the EPSON Status Monitor 3 window that
appears.
Sleep mode
Control panel: Ready light on
Indicates that the printer is in energy-saving mode. The printer goes into standby due to inactivity.
If the Sleep mode is enabled, the printer goes into standby in 5 minutes.
Ready
Control panel: Ready light on
Indicates that the printer is ready to print.
Printing
Control panel: Ready light flashing
Indicates that the printer is printing data.
Processing Data
Control panel: Ready light flashing
Indicates that the printer is processing data.

Printing a Status Sheet

To confirm the current status of the printer, print a status sheet. The status sheet contains
information about the printer, the current settings, and the installed options, if any.
EPSON AcuLaser M1200 Series
Troubleshooting
User's Guide
95