Memory Problems - Epson Aculaser M1200 series User Manual

Non-printed side of the page is dirty
Cause
Toner may have spilled onto the paper feed path.
White spots, black dots, or black horizontal lines appear in a cyclic manner in the printout
Cause
There may be a problem with the photoconductor unit.

Memory Problems

Note
The resolution to some memory problems may suggest that you increase the memory of the printer.
Note that only the EPL-6200 allows you to increase the memory by installing a memory module.
Print quality decreased
Cause
The printer cannot print at the required quality level
because of insufficient memory, and the print quality
was automatically lowered so that the printer can
continue printing.
Insufficient memory for current task
Cause
The printer does not have sufficient memory for the
current task.
EPSON AcuLaser M1200 Series
What to do
Turn off the printer. Clean internal printer components.
What to do
Turn off the printer. Remove the unit, and reinstall it. If
this does not solve the problem, replace the
photoconductor unit as described under
"Photoconductor Unit" on page 74.
What to do
Check to see if the printout is acceptable. If not, add
more memory for a permanent solution or temporarily
lower the Print Quality setting in the printer driver.
What to do
Add more memory for a permanent solution or
temporarily lower the Print Quality setting in the printer
driver.
User's Guide
Troubleshooting 108