Epson Aculaser M1200 series User Manual page 126

Print Sample
EPSON Code39
EPSON Code39 Num
EPSON Code128
❏ Code128 fonts support code sets A, B, and C. When the code set of a line of characters is
changed in the middle of the line, a conversion code is automatically inserted.
❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in
conformance to the Code128 standard. For this reason, it is important to keep at least one
space between the bar code and the surrounding text to prevent overlapping.
❏ Some application software automatically delete the spaces at the end of lines or change
multiple spaces into tabs. Bar codes containing spaces may not be correctly printed from
applications that automatically delete spaces from the ends of lines or change multiple spaces
into tabs.
❏ When printing two or more bar codes on one line, separate the bar codes with a tab, or select a
font other than a BarCode Font and input a space. If a space is input while Code128 is selected,
the bar code will not be correct.
Character type
Number of characters
Font size
The following codes are inserted automatically and need not be input by hand:
❏ Left/Right quiet zone
❏ Start/Stop character
EPSON Code39 CD
EPSON Code39 CD Num
All ASCII characters (95 in total)
No limit
26 pt to 104 pt (up to 96 pt in Windows Vista, XP, and 2000).
Recommended sizes are 26 pt, 52 pt, 78 pt and 104 pt.
EPSON AcuLaser M1200 Series
Working with Fonts
User's Guide
126