Thick Paper; Transparencies - Epson Aculaser M1200 series User Manual

AcuLaser M1200/EPL-6200L
To print on envelopes, choose Thick Narrow from the Paper Type drop-down list in the printer
driver.
The print quality on envelopes may be irregular because different parts of an envelope have
different thicknesses. Print one or two envelopes to check the print quality. If the printing is too
light, adjust the print density as described in "Print Quality Problems" on page 105.
Do not use window envelopes unless they are specially designed for laser printers. The plastic on
most window envelopes will melt when it comes into contact with the hot fuser.

Thick paper

You can load up to 10 sheets of thick paper into the MP tray. However, you may need to feed some
types of thick paper one sheet at a time. Use thick paper between 90 and 163 g/m2 (24 to 43 lb) in
weight.
To print on thick paper, be sure to change the Paper Type setting in the printer driver settings.
Choose Thick Narrow for thick paper which is less than 160 mm wide. Choose Thick Wide when
printing on thick paper which is 188 mm or wider.

Transparencies

You can load up to 5 transparencies into the MP tray. However, you may need to feed some types
of transparencies one sheet at a time.
You can only use overhead projector transparencies and adhesive drafting film made for use with
laser printers or plain-paper copiers.
EPSON AcuLaser M1200 Series User's Guide
Paper Handling 27