Epson Aculaser M1200 series User Manual page 94

Paper Size Warning
Control panel: Ready light on
The size of the paper that fed through the printer does not match the specified paper size. Click
Close on the EPSON Status Monitor 3 window that appears to dismiss the warning.
Not All Pages Are Printed
Control panel: Ready light on
This warning is displayed if an Insufficient Memory to Print Current Page error has occurred
while Auto Continue is set to On. Click Close on the EPSON Status Monitor 3 window that
appears to dismiss the warning.
Warming Up
Control panel: Ready light flashing
Indicates that the printer is warming up to process and print data.
Replace Photoconductor Unit
Control panel: Ready light flashing (flashes at longer intervals than usual)
Indicates that the photoconductor unit is close to the end of its service life (less that 5%). Prepare a
new photoconductor unit to replace the current one. See "Photoconductor Unit" on page 74 for
instructions.
To temporarily dismiss the warning, click Close on the EPSON Status Monitor 3 window that
appears. Resetting the photoconductor unit also clears the warning.
Toner Low
Control panel: Ready light flashing (flashes at longer intervals than usual)
Indicates that the developer cartridge is nearly out of toner. Prepare a new developer cartridge to
replace the current one. See "Developer Cartridge" on page 69 for instructions.
Installed Developer Cartridge is Not a Genuine Epson Product Warning
Control panel: Ready light flashing (flashes at longer intervals than usual)
EPSON AcuLaser M1200 Series
Troubleshooting
User's Guide
94