Printer Driver Settings - Epson Aculaser M1200 series User Manual

Mac OS X
To access the printer driver, register your printer in Print & Fax (for Mac OS X 10.5), Printer
Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2), click Print on
the File menu of any application, then select your printer.
From an application
❏ To open the Paper Setting dialog box, select Page Setup from the File menu on any application.
❏ To open the Basic Settings tab, select Print from the File menu on any application.
Note:
The printer driver's online help provides details on printer driver settings.

Printer driver settings

To control your printer and change its settings, use the printer driver. The printer driver allows
you to easily make all the print settings, including paper source, paper size, and orientation. To
access the driver menus, see below.
Modifying the print layout
"Layout printing" prints either two or four pages onto a single page and to specify the printing
order, automatically resizing each page to fit the specified paper size. You can also choose to print
documents surrounded by a frame.
1. Open the Print dialog box.
2. Select Layout from the drop-down list.
3. Select the number of page you want to print on one sheet of paper from the drop-down list.
4. Click Print to start printing.
Note:
The Layout settings are a standard feature of Mac OS X.
Avoiding Insufficient Memory Error (AcuLaser M1200/EPL-6200L)
When you print graphics or a large amount of data, the printer may stop due to insufficient
memory. Follow the steps below to avoid memory errors and continue printing.
EPSON AcuLaser M1200 Series
Using the Printer Driver For Macintosh
User's Guide
49