Epson Aculaser M1200 series User Manual page 60

Follow the steps below to set a Windows Vista, Vista x64, XP, XP x64, or 2000 as a print server,
then install the additional drivers.
Note:
You must access Windows XP, XP x64, or 2000 as the Administrators of the local machine.
1. For a Windows Vista or Vista x64 print server, click
double-click Printers.
For a Windows XP or XP x64 print server, click Start, point to Printers and Faxes.
For a Windows 2000 print server, click Start, point to Settings, then click Printers.
2. Right-click your printer's icon, then click Sharing in the menu that appears.
For Windows Vista, click Change sharing options, then click Continue.
For Windows XP or XP x64, if the following menu appears, click either Network Setup
Wizard or If you understand the security risks but want to share printers without
running the wizard, click here.
In either case, follow the on-screen instructions.
3. For a Windows Vista, Vista x64, XP, or XP x64 print server, select Share this printer, then
type the name in the Share name box.
Note:
Do not use spaces or hyphens for the Share name, or an error may occur.
EPSON AcuLaser M1200 Series
Start, click Control Panel, then
Setting Up Your Printer on a Network (AcuLaser M1200)
User's Guide
60