Epson Aculaser M1200 series User Manual page 71

2. Open the front cover by placing your fingers on the grooves on both sides of the cover as
shown below, and then pull the cover towards you.
Caution:
c
You must completely open the printer cover when replacing the developer cartridge;
otherwise, you may damage the printer.
3. Hold the photoconductor unit's casing by the handle and slowly pull it out of the printer.
Warning:
w
Do not touch the fuser, which is marked CAUTION Hot Surface. If the printer has been in
use, the fuser may be very hot.
Caution:
c
Be careful not to spill any remaining toner from the used developer cartridge. If toner is
spilled inside the printer, clean it with a clean, dry, lint-free cloth or with a
vacuum-cleaning device.
EPSON AcuLaser M1200 Series
Replacing Consumable Products
User's Guide
71