Epson Aculaser M1200 series User Manual page 93

Output Cover Open
Control panel: Ready and Error lights on
The printer's output cover is open. Make sure that the printer's output cover is closed properly by
opening and closing it again.
Printing on Incorrect Paper Size
Control panel: Ready light on, Error light flashing
The paper loaded in the paper source does not match the required paper size. Replace with paper
of the correct size and click Continue on the EPSON Status Monitor 3 window that appears. If
you want to change printer driver settings, click Stop.
Unsupported Paper Size
Control panel: Ready light on, Error light flashing
The specified paper size is not supported by this printer, or the paper feed direction is incorrect.
To continue printing from the page after the page that caused the error, click Continue on the
EPSON Status Monitor 3 window that appears. If you want to change printer driver settings, click
Stop.
Time Out Error
Control panel: Ready light on, Error light flashing
Data transmission from the computer to the printer is interrupted and a timeout error has
occurred. Click Print Again on the EPSON Status Monitor 3 window that appears to resume
printing. If printing does not resume, or if you want to change printer driver settings, click Stop.
Insufficient Memory to Print Current Page
Control panel: Ready light on, Error light flashing
The printer does not have sufficient memory to print the current page. To continue printing from
the page after the page that caused the error, click Continue on the EPSON Status Monitor 3
window that appears. If you want to change printer driver settings, click Stop.
EPSON AcuLaser M1200 Series
Troubleshooting
User's Guide
93