Dell Networking 7048 Release Note page 57

PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/
M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA
Release Notes
User Guidelines:
N/A
Examples:
console#show interfaces media-type
Port Configured Media-Type(s)
--------- ---------------------------
Te1/0/21 auto-select, SFP preferred
Te1/0/22 auto-select, SFP preferred
Te1/0/23 auto-select, SFP preferred
Te1/0/24 auto-select, SFP preferred
Release 4.1.0.6
The Dell PowerConnect CLI Reference Guide is completely new. Users are referred to the Dell PowerConnect
Configuration Migration White Paper for information on how to migrate configurations from previous releases of Dell
PowerConnect firmware to the 4.0.0.6 Dell PowerConnect firmware.
The following table lists issues found in the CLI Reference Guide after publication:
Command
show service-policy in
show copper-ports cable-
length
System Firmware Version 5.1.0.1
Active
------
SFP
SFP
Down
Down
The supported syntax is show service-policy {in|out}
This command is deprecated. Use the show copper-ports tdr
command to display the stored information regarding cable lengths
and the test copper-port tdr command to perform a cable length test.
Testing a port brings the port down momentarily.
Issue
Page 55