Dell Networking 7048 Release Note page 48

Summary
PC M8024 switch reset out-of-
band address to none when
switchports were changed
Web page shows IP address as
'0.0.0.0' for '1.1.1.1' routing
interface.
Read-Only Web page is
populating all configured IP
and IPv6 ACL names when we
select the ACL Name.
FAN LED graphic on web page
needs to glow in RED when
FANs are not operational
(stopped).
Incorrect command is being
displayed in running-config,
when boot host dhcp is
disabled.
DUT crashes while configuring
max dynamic VLANs.
Manager of the stack is
changing when trying to learn
maximum number of VLANs
using GVRP.
Switch prompts to save config
data when no changes have
been made
Crash while RFC3918 Group
Capacity test is running
'no' version of 'key' command
is not implemented
Password is not accepting
quotation ( " ) character
Incorrect warning message
displayed while executing the
command "boot system <unit>
image1"
IPV6 command displays wrong
output
LLDP-MED log messages
showing 5 sec difference in
entry age out information
46
User Impact
Inability to access switches via OOB port.
Potential operator confusion over switch
operations
Potential operator confusion regarding web
page operations.
Inability to determine switch status.
Potential operator confusion regarding web
page operations.
Network outage possible.
Potential operator confusion regarding
switch operations.
Potential operator confusion regarding
switch operation.
Network outage possible.
Potential operator frustration with switch
management.
Potential operator confusion regarding
switch configuration.
Potential operator confusion regarding
switch operation.
Potential operator confusion regarding
switch operation.
Potential operator confusion regarding
switch operation.
Resolution
The out-of-band address is
maintained over switchport
changes.
The web page output has
been corrected.
The web page has been
corrected to only populate
the selected entry.
Web page has been corrected
The running config now
shows the correct
configuration
The PowerConnect does not
crash when using maximum
dynamic VLANs
The stack manager does not
change during learning with
GVRP
The switch no longer
prompts to save config data
if no changes have been
made
The PowerConnect switch
runs the RFC3918 test
without crashing
The no key command is
implemented to return the
key configuration to the
default.
Passwords can be enclosed
in quotes (contain embedded
blanks). A password may not
contain a quote. The
accepted character set and
length is documented in the
CLI reference manual.
The error message has been
corrected to indicate that the
unit selected for reboot does
not exist.
The IPv6 output has been
corrected to remove the
duplicate display lines in
show ipv6 help.
The LLDP timer has been
updated to account for
processing skew.
System Firmware Version 5.1.0.1
Affected
Platforms
PCM8024
All
Platforms
All
Platforms
All
Platforms
All
Platforms
All
Platforms
All
Platforms
All
Platforms
All
Platforms
All
Platforms
All
Platforms
All
Platforms
All
Platforms
All
Platforms