Table of Contents
Advertisement
Antenna VHF
Antenna UHF
/-
3.-----
;--
300 Ohm Flat
Twin Lead
:--- 75 Ohm
CoaxialCable
A
300 Ohm
Flat Twin Lead
'_:_
l
_
ilm
bine/r/
0-
- _
_''_
]_"
_" _''_"
300 - 75 Ohm Adapter-_/
ANTENNA I
.-@
®
OUT
I
Connecting the Television
Now that you have completed
the antenna
connections
to your
VCR, you're ready to connect the VCR to the TV. (If you haven't
connected
the antenna
to the VCR, go to page 11, "Connecting
the
Antenna
or Cable to the VCP.')
Because
every television
is
different
(especially
older model TVs), your VCR may need to be
connected
in one of a variety
of ways. This section shows :you:
• Determining
if you need a splitter,
• Connecting
a regular
TV to the VCR, and
• Connecting
a 2_ with audio and video inputs.
Determiningif you need a splitter
You should
look at the back panel of your TV to see if you need
any special
equipment
to connect the TV to the VCR. You may
need an attachment
called a UHF/VHF
splitter
(which is avail-
able at your local electronics
store).
The chart on the next page will tell you if you need a splitter,
and
what the splitter
will look like.
15
Advertisement
Table of Contents
