Table of Contents
Advertisement
E>Important:
• Program
to
record
I
_D6Y
ON
OFF
2 MOI9
II:30A.
I:30PM
I0 TH22
9:00OMI0:00PM
Use
ADJUST
to
select,
and
ENTER.
Press
MENU
for
Main
Menu
Remember
that when your VCR is off, it may also be in stand-by
for programmed
recording.
Also remember
that the VCR, when
programmed,
will record over the next section
of tape. So, to avoid
recording
over tapes that you want to save, remember
that the
VCR automatically
shuts off during
OTR recording
and "rewind
&
off."
Your VCR will not record over a tape that has the erasure
preven-
tion tab removed
(see "Preventing
Accidental
Erasure").
All rental
movies have this tab removed,
so they are safe £rom being acci-
dentally
erased.
programming " IV programs thatendon the dayafter
If you want to start
the recording
at 11:00 PM and end it at 2:06
AM the next day, simply
set the start
time to 11:00 PM on the
recording
start day and the end time to 2:00 AN.[. There is no need
to change
the day of the week.
skipping programs
If you have already
entered
a program
into your VCR's memory,
you can skip the program
without
going into the VCR's menus.
Simply press the POWER
button
on the front panel once. The
programmed
recording
light
([_) will turn off, and the program
will be skipped.
If you decide not to skip the program,
press the
POWER button
on the front panel twice; the programmed
record-
ing light will light up again.
changing programmed r ecording settings
If you want to change
the programmed
recording
settings:
O
Turn the VCR on with the POWER
button.
Press the MENU
button
on the remote
con_;ro).
@) Press the JOG/ADJUST
buttons
to select "Program
to
Record." Press ENTER.
You'll see the "recap" screen.
O
Press the JOG/ADJUST
buttons
to place the cursor next to
the program
you wish to change.
Press the ENTER button.
Press the ENTER
button
to place the cursor next to the item
you wish to change.
Change
it with the JOG/ADJUST
but-
tons.
Use the MENU button
to turn off the menus.
Then, use the
POWER button
to turn
off the VCR. Make sure the pro-
grammed
recording
light is on.
41
Advertisement
Table of Contents
