Table of Contents
Advertisement
O
O
O
Use the INPUT
button
to set the HS-U410
to External
("L" will be displayed
on the
fluorescent
display).
Put, a blank
tape into the HS-U410
and
find the place where you want to begin
recording.
Press STOP.
Put the tape you want to copy into the
other VCR and find the place from which
you want to begin copying. Press STOP.
Q
On the HS-U410,
press record (REC or
REC/OTR),
and then PAUSE.
On the other VCR, press PLAY and tlhen
:PAUSE.
_)
Release the PAUSE
butLon on both VCRs
at the same time.
O
Press STOP on both VCRs when you are
finished.
UsingyourHS-U410 to play backto another V CR
t F' ¥SACKI
[RECORDING I
O_90
_v,o oouT
--AUDIO
IN L
--AUDIO
IN R
O
O
O
el
Connect
one RCA audio cable to the
AUDIO INPUT
terminal
on the other
VCR. Connect
the other end of this cable
to the AUDIO OUTPUT
terminal
on the
HS-U410
(labeled
L). If the other VCR is
mono, you will need a Y-adapter
to hear
both audio channels
on your new tape.
If the other VCR has stereo inputs,
connect
another
RCA audio cable to the
AUDIO INPUT
terminal
of the other VCR.
Connect
the other end of this cable to the
AUDIO
OUTPUT
terminal
on the
HS-U410
(labeled
R).
Connect
a video cable to the VIDEO
INPUT
terminal
on the other VCR.
Connect
the other end of this cable to the
VIDEO
OUTPUT
terminal
on the
HS-U410
(labeled
VIDEO OUT).
Set the audio monitor
on the HS-U410
to
"STEREO."
(See "Using the Audio and
Video Functions,"
on page 25.)
Set the input of the other VCR to "Exter-
nal."
0
0
Put a blank tape into the other VCR and
find the place where you want to begin
recording.
Press STOP.
Put the tape you want to copy into the
HS-U410
and find the place from whicl_L
you want to begin copying. Press STOP.
On the other VCR, press record (REC),
and then PAUSE.
On the HS-U410,
press PLAY and then
PAUSE.
O
Release
the PAUSE
button
on both VCRs
at the same rime.
0
Press STOP on both VCRs when you are
finished.
51
Advertisement
Table of Contents
