Connections
Ilconneth
I 2 Â3Con--tth
°Conn
indoor antenna
external unit.
speaker cable.
AC power suppl!
(included).
cord (included).
\
PHOflO
CO
FMANT
GND
REMOTE
@
SPEAKERS
Cooling fan
1
Connect the FM indoor antenna.
(included)
Install this antenna on a wall at a height and direction which
result in best reception.
For best reception
sound quality:
An FM outdoor antenna is recommended.
The tack should
not contact the internal antenna wire.
Disconnect
this antenna if an FM outdoor antenna is installed.
','_','-"---- Tack or
"_"
tape
_--_
Remove a piece of the outer
r_
vinyl sheath and twist the canter
conductor.
•
FM
outdoor
antenna
(not included)
If the FM indoor antenna does not provide satisfactory reception of
FM broadcasts, an outdoor antenna should be used.
The outdoor antenna may be required in a mountainous region, or if
this unit is located inside a reinforced-concrete building,
etc.
An outdoor antenna should be installed by a competent technician
only.
-- How to connect a 75-ohm coaxial cable
1. Remove a piece of the
outer vinyl sheath from
the end.
30 mm (13/_e")
2. Bundle the shield braid,
and remove a piece of
the inner vinyl sheath
covering the core wire.
15 mm (1%2")
3. "nitthe lever back and
insert the core wire and
the shield braid.
r_
FM ANT
4. Close the lever and pull
the cable gently to be
sure that it is secured.
-6-