Panasonic DVD-CV36 Series Quick Manual

DVD
Products
Model :
Special customer inquiry
Parts shortage solution
Important Information when replacing the Spindle Motor (SPM) Assembly
Subject :
Object : DVD-CV36, DVD-CV37, DVD-CV47, DVD-CV52, DVD-CV290
Models DVD-CP67, DVD-CP72
SA-DK10, SA-DK20
SA-HT65, SA-HT67, SA-HT70, SA-HT75, SA-HT95
SA-DM3
Object : Part Name
Parts SPM Assembly
SPM Assembly
Content :
Please refer to this supplement regarding the use of 2 types of SPM assemblies and their differences.
Since May 2002 production, the projection in the Traverse base of the (SPM) Spindle Motor Assembly has
been modified and the inner stopper has been deleted.
Therefore, in the course of servicing DVD changers and DVD Home Theater systems, you will encounter
2 types of SPM assemblies.
* There are the original Type A (with the inner stopper) and the revised Type B (without the inner
stopper). See diagrams below.
In addition, there are two types of Spindle Motor Assemblies (SPM) supplied as replacement parts.
* There are SPM TYPE 1 (short projection WITH inner stopper) and TYPE 2 (short projection
WITHOUT inner stopper). Refer to the pictures in the following page.
SPM Assembly used in the Products
Inner Stopper
Projection
* The TRV base which has short
Quick Service Manual
DVD-CV36/CV37 Series, DVD-CP67/CP72,
SA-HT70/HT75 Series, SA-DK10/DK20, etc.
Product improvement
Other (
Original (Type A)
Short
projection has to be equipped with
an inner stopper.
)
Service Part #
RXQ0749B
RXQ1028
Ref.No. : NWBG0309CV52a
Date : September, 2003
Cases reported (country)
Canada/Australia
Frequence
High Low
New (Type B)
TRV base
Long
Projection
QSM03-DVD003
level
A few One