Table of Contents
Advertisement
2
Connect the external
uniL
• To connect
a turntable.
The "GND" terminal is for use with turntables which have a ground
wire.
L
Turntable (not included)
(R) {L)
V
Stereo connection cable
(not included)
• To connect a CD player.
When the "REMOTE"
connection is made, the operation of the
compact disc player can be controlled using the remote control
transmitter supplied with this unit.
[_
Compact disc player (not included)
(R) (L)
_"
Stereo connection cable
(not included)
_"
Remote control cable
(not included)
3
Connect the speaker cable.
The load impedance of any speaker used with this unit must be
8-16
ohms.
Be sure to connect the striped wire to the negative terminals.
-- Connection of speaker cables
_) Strip off the outer
=_;;_=m=
_1, _;;;;;;;a---
covering, and twist the
center conductor.
15 mrn
Twist
(_ Tilt the lever back end
insert the wire.
_) Close the lever and pull
the wire gently to be sum
that it is secure.
Notes:
eTo prevent damage to circuitry, never
short-circuit positive (+)
and negative
(-)
speaker wires.
oBe
sure to only connect positive (+)
wires to positive (+) terminals, and nega-
tive (-) wires to negative (-) terminals.
oConnections
of speaker cables should be made before
connecting
the AC power supply cord.
• To connect a audio tape deck (for playback only)
or output terminals
of a VCR or "rv.
((RL
Video cassette recorder (not included)
Stereo connection cable
(not included)
4
Connect the AC power supply cord after all
other cables are connected.
AC outlet
Power is controlled
by power switch of this unit. Audio equipment
rated up to 100 W can be connected.
Cooling fan
The COOling fan operates only at high output power levels.
-7-
Hide quick links:
Advertisement
Table of Contents
