Table of Contents
Advertisement
4
5
Press
and
hold the memory
button
and
then
release
it when the display
frequency
begins to
change.
The memory indicator will flash, and the automaticmemory
presettingis activated,
Confirm the stations which are preset to each
channel, and write in the station log on page
18.
• To designate
channels
1-9:
Press the appropriate (1-9)
preset-tuning buttOn.
eTo designate
channels
10-24:
(_) Press the button for the lelt digit (! or 2).
(_) Press the button for the right digit (0-9) within 2 seconds
after pressing the first button.
Example:
To designate channel 12
Press the "1" button and then the "2" button.
Notes
For automatic presetting in areas where there are fewer than 24
FM stations, the remaining channels (through channel 24) will
be left unoccupied. The unoccupied channels can be filled by
using manual memory presettings.
For AM broadcasts with extremely strong signal transmissions,
the frequency memorized may be slightly different than the
correct frequency. If this occurs, make a manual presetting.
If the interval between pressing the first button and pressing the
second button is more than about 2 seconds, the setting may
not be made correctly. If this happens, make the setting once
again. When making a memory
presetting manually, once
again designate the channel to be selected after pressing the
memory button.
-15-
Hide quick links:
Advertisement
Table of Contents
