.- Amplifier controls,
I
TAPE
Fig.
Remote control section
Remote
control
transmission
window
Aim the transmission v_ndowtowardthe remotecontrol signal
receptor of the main unit when operatingthe remote control.
Amplifier controls (Fig.l)
Power button (POWER)
Note that there is no need to press thLsbutton if the unit's power is
ON. (If it is pressed, the power to this unit will be switched OFF.)
Input selectors
(VIDEO, TAPE)
These selectors are used to select the sound source to be heard.
VIDEO:
Press to select the sound source connected to the
"VIDEO"
terminals such as video deck or TV.
TAPE:
Press to select the tape playback source.
_Volume
buttons (VOLUME)
For adjustment of the volume level.
&: To increase the volume teveL
V: To decrease
the volume ieveL
Tuner controls
(Fig. 2)
_)Tuner
preset buttons (TUNER PRESET)
Press to select a preset channel.
(There will be an automatic change of the input selector.)
A:
Press to change to a higher channel.
• : Press to change to a lower channel.
-11-