Table of Contents
Advertisement
Selecting
fine audio equ*pment
such as the unit you've just pur-
chased is only the start of your musical enjoyment• Now it's time to
consider bow you can maximize the fun and excitement your equip-
ment offers
This manufacturer
and the Electronic Industries Asso-
ciation's Consumer
Electronics Group want you to get the most out
of your equipment
by ptaying it at a safe level
One that lets the
sound come through loud and clear without annoying blaring or dis-
tortion--and,
most
importantly,
without
affecting
your
sensitive
hearing.
We recommend
you to avoid prolonged
exposure
to excessive
noise.
Sound can be deceiving.
Over time your hearing "comfort
level"
adapts to higher volumes of sound
So what sounds "normal" can
actually be loud and harmful to your hearing,
Guard
against
this by setting
your equipment
at a safe
level
BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting
• Slowly increase the sound until you can hear it comfortably
and
clearly, and without distortion
Once you have established
a comfortable
sound level:
• Set the dial and leave it there
Taking a minute to do this now will help to prevent hearing damage
or loss in the future After all, we want you listening for a lifetime.
ment
of speake ,
Speakers
are designed
identically
so that no left or right channel
orientation is necessary.
• Keep
your
speakers
at least
10 mm ('3/32) away
from the system
for proper
ventilation
• These
speakers
do not have magnetic
shielding
Do not place
them
near
televisions
personal
computers
or
other
devices
easily
influenced
by mag_7etism
• Toavoiddamage_othespeakErs
do not touch
the speakers
cones
if yoll
have taken
:hi _ nits
off
Insert the batteries observing the
correct polarities (_),_:))
R6, AA, UM-3
Use of batteries
• Align the poles (+ and -) properly when inserting the batteries.
• Do not mix old and new batteries or different types of batteries•
• Do not recharge ordinary dry cell batteries.
• Do not heat or disassemble
the batteries• Do not allow them to
contact flame or water.
• Remove the batteries if the unit is not to be used for a long time.
• Do not keep together with metallic objects such as necklaces.
• Do not use rechargeable type batteries•
• Do not use batteries if the covering has been peeled off.
Mishandling
of batteries can cause electrolyte
leakage
which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer,
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Remote control
signal sensor
30
30
About 7 meters
in front of the
•
signal sensor
Transmission
window
Operations
notes
• Do not place obstacles between the remote control signal sensor
and remote control unit
• Do not expose the remote control signal sensor to direct sunlight or
to the bright light of a fluorescent
light
• Take care to keep the remote control signal sensor and end of lhe
remote control unil free lrom dusl
• If this system is installed in a rack wiih glass doors the glass doors
thickness
or color might make il necessary
to use the remote
conlrol a shorter distance from the system
L
To prevent
damage
• Do not disassemble or reconstruct the unit
• DO not spill water or other liqu=ds imo the unit
I
Advertisement
Table of Contents
