Example 2: Adding A Tie To A Set Of Video And Audio Ties - Extron electronics CrossPoint 450 Plus Series User Manual

Operation, cont'd

Example 2: Adding a tie to a set of video and audio ties

In the following example, a new video tie is added to the current confi guration.
The steps show the front panel indications that result from your actions.
N This example assumes that you have performed example 1.
1.
Figure 3-10 — Clear all selections
2.
Press the RGBHV/Video button to toggle on and off.
Figure 3-11 — Select RGBHV or video only
3.
Press and release the Input 5 button.
The button lights green to indicate that RGBHV or
video outputs can be tied to or untied from this input.
1 2 3
17 18 19 20 21 22 23 24
Figure 3-12 — Select an input
4.
Figure 3-13 — Select the output
CrossPoint 450 Plus and MAV Plus Switchers • Operation
3-12
Press and release the Esc button (fi gure 3-10).
Press the Esc button to clear all selections.
C O N T R O L
VIEW ESC
ENTER PRESET
The button flashes once.
To select video only for the tie, if necessary, press and release the RGBHV
(CrossPoint 450 Plus switchers) or Video (MAV Plus video switchers) button
and the Audio button (fi gure 3-11).
VIDEO
The button lights green when selected.
Press and release the input 5 button (fi gure 3-12).
4 5 6 7 8 9
25
Press and release the output 1 button (fi gure 3-13).
Press and release the Output 1 button.
The button blinks green to indicate that only the selected RGBHV
or video input will be tied to this output.
1 2 3 4 5
17 18 19 20 21 22 23 24
= Blinking button
I / O
AUDIO
Press the Audio button to toggle on and off.
The button is unlit or background illuminated when deselected.
The Output 3, Output 4, and Output 8 buttons light green to
indicate the RGBHV or video ties created in example 1.
I
1 2 3 4
N
P
U
T
17 18 19 20 21 22 23 24
I
S
N
6 7 8 9
25
O
U
T
5 6 7 8 9
25
O
U
T
C O N T R O L
VIEW ESC
ENTER PRESET
The Enter button blinks
green to indicate the need to
confirm the change.