Extron electronics CrossPoint 450 Plus Series User Manual page 41

Press and release the input 5 button (fi gure 3-6).
3.
Press and release the Input 5 button.
The button lights amber to indicate that RGBHV
and audio outputs can be tied to this input.
1 2 3 4
17 18 19 20 21 22 23 24
Figure 3-6 — Select an input
Press and release the output 3, output 4, and output 8 buttons (fi gure 3-7).
4.
N The entire set of ties can be canceled at this point by pressing and releasing the
Esc button. The Esc button fl ashes green once.
Press and release the Output 3, Output 4, and Output 8 buttons.
The buttons blink amber to indicate that the selected RGBHV or video and audio
input will be tied to these outputs.
1 2 3 4
17 18 19 20 21 22 23 24
= Blinking button
Figure 3-7 — Select the outputs
5. Press and release the Enter button (fi gure 3-8).
Press the Enter button to
confirm the configuration
change.
All input buttons and output buttons
ENTER
return to unlit or background illumination.
The Enter button returns to
unlit or background
illumination.
Figure 3-8 — Press the Enter button
The current confi guration (fi gure 3-9) is now:
• Input 5 video and audio tied to output 3, output 4, and output 8
Input 5 (video/audio) tied
to outputs 3, 4, and 8.
Input
5
Figure 3-9 — Example 1, fi nal confi guration
CrossPoint 450 Plus and MAV Plus Switchers • Operation
I
5 6 7 8 9
N
P
U
T
25
I
S
N
5 6 7 8 9
25
O
U
T
3
Output
4
8
Video
Audio
C O N T R O L
VIEW ESC
ENTER PRESET
The Enter button blinks
green to indicate the need to
confirm the change.
3-11