How To Use A Set-A-Goal Workout - NordicTrack Commercial 1750 NTL14010.1 User Manual

HOW TO USE A SET-A-GOAL WORKOUT
1. Insert the key into the console.
See step 1 on page 16.
2. Select the start menu.
See step 2 on page 16.
3. Select a set-a-goal workout.
To select a set-a-goal workout, press the Workouts
button on the screen. Then, press the Set a Goal
button. You can also press the Set A Goal
Workouts button on the console.
To set a time, distance,
or calorie goal, press
the Time, Distance, or
Calories button. Then,
press the increase and
decrease buttons on
the screen to select a
time, distance, or calorie goal and to select the
speed and incline for the workout. The screen will
show the duration and distance of the workout, and
the approximate number of calories you will burn
during the workout.
4. Start the workout.
Press the Start Workout button to start the work-
out. A moment after you press the button, the walk-
ing belt will begin to move. Hold the handrails and
begin walking.
The workout will function in the same way as the
manual mode (see pages 16 to 18).
The workout will continue until you reach the goal
that you set. The walking belt will then slow to a
stop, and a workout summary will appear on the
screen. After you view the workout summary, press
the Done button.
Note: The calorie goal is an estimate of the
number of calories that you will burn during the
workout. The actual number of calories that
you burn will depend on your weight. In addi-
tion, if you manually change the speed or in-
cline of the treadmill during the workout, the
number of calories you burn will be affected.
5. Monitor your progress.
See step 5 on pages 17 and 18. The screen can
also show your goal and a status bar showing your
progress toward your goal.
6. Measure your heart rate if desired.
See step 6 on page 18.
7. Turn on the fan if desired.
.
See step 7 on page 18.
When you are finished exercising, remove the
key from the console.
See step 8 on page 18.
19