Table of Contents
Advertisement
PROBLEM:
The walking
belt is off-center or slips when walked on
SOLUTION:
a. If the walking belt is off-center,
first remove the
key and UNPLUG THE POWER CORD. If the
walking
belt has shifted to the left, use the hex
key to turn the left idler roller bolt clockwise 1/2 of
a turn; if the walking belt has shifted to the
right, turn the left idler roller bolt counterclockwise
1/2 of a turn, Be careful not to overtighten the
walking belt. Then, plug in the power cord, insert
the key, and run the treadmill for a few minutes.
Repeat until the walking belt is centered.
b.
if the walking belt slips when walked on, first re-
move the key and UNPLUG THE POWER CORD.
Using the hex key, turn both idler roller bolts clock-
wise, 1/4 of a turn. When the walking belt is cor-
rectly tightened, you should be able to lift each
edge of the walking belt 2 to 3 in, (5 to 7 cm) off
the walking platform. Be careful to keep the walk-
ing belt centered, Then, plug in the power cord, in-
sert the key, and carefully walk on the treadmill for
a few minutes, Repeat until the walking belt is
properly tightened.
PROBLEM:
The iFit Live mode does not function
correctly
SOLUTION:
a. If the iFit Live mode is not functioning correctly, make sure that the treadmill has the most current
firmware available (see step 8 on page 26).
PROBLEM:
The treadmill
will not connect
to the wireless
network
SOLUTION:
a. Perform a network test (see step 6 on page 26).
b. Make sure the wireless settings on your console are correct (see step 2 on page 23).
c. Make sure the settings for your wireless network are correct.
d. If you still have questions, see the front cover of this manual.
PROBLEM:
The buttons
on the screen do not work correctly
SOLUTION:
a. If the screen is not properly calibrated, it will be difficult to touch the correct buttons on the screen.
To calibrate the screen, see step 5 on page 25.
31
Hide quick links:
Advertisement
Table of Contents
