NordicTrack Commercial 1750 NTL14010.1 User Manual page 8

4. 4
Holdthe LeftUpright ( 89)against t heBase
(97).Becarefulnot to pinch the wires.If nec-
essary, p osition theBaseGround Wire(94)in
theholeinthesideoftheLeftUpright. I nsert
two3/8"x 2 3/4"Bolts(7)andtwo3/8"x 1 1/4"
Bolts(8)withtwo3/8"StarWashers (12)into
theLeftUpright.
Partially tighten the3/8"x2 3/4"Bolts(7)and
the3/8"x 1 1/4"Bolts(8)untiltheheads ofthe
BoltstouchtheLeftUpright ( 89); d o not fully
tightenthe Boltsyet. Note:It maybehelpful t o
usethe Short H exKey(63)ontheBoltshown.
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the
right side.
12
97
.
Identify the Left Base Cover (92) and the Right
Base Cover (93). Slide the Left Base Cover onto
the Left Upright (89). Slide the Right Base Cover
onto the Right Upright (90). Do not press the
Base Covers into place yet.
92