NordicTrack Commercial 1750 User Manual

Hide thumbs Also See for Commercial 1750:

User manual

Owner's manual (30 pages)

User manual (40 pages)

Table Of Contents

Table of Contents

Quick Links

Summary of Contents for NordicTrack Commercial 1750

Page 1 Model No. NETL20717.0 Serial No. USER’S MANUAL Write the serial number in the space above for reference. Serial Number Decal CUSTOMER SERVICE UNITED KINGDOM Call: 0330 123 1045 From Ireland: 053 92 36102 Website: iconsupport.eu E-mail: csuk@iconeurope.com Write: ICON Health & Fitness, Ltd. Unit 4, Westgate Court Silkwood Park OSSETT...
Page 2: Table Of Contents
Note: The decals may not be shown at actual size. NORDICTRACK and IFIT are registered trademarks of ICON Health & Fitness, Inc. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S.
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
Page 4 21. The treadmill is capable of high speeds. 27. Never insert any object into any opening on Adjust the speed in small increments to the treadmill. avoid sudden jumps in speed. 28. Inspect and properly tighten all parts each 22. The heart rate monitor is not a medical time the treadmill is used.
Page 5: Before You Begin
COMMERCIAL 1750 treadmill. manual. To help us assist you, please note the product ® The COMMERCIAL 1750 treadmill offers an impres- model number and serial number before contacting us. sive selection of features designed to make your The model number and the location of the serial num- workouts at home more effective and enjoyable.
Page 6: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
Page 7: Assembly
ASSEMBLY • Assembly requires two persons. • Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.” • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing •...
Page 8 3. Lay the Right Upright (84) near the Base (93). Press the Upright Grommet (86) into the square hole (B) in the Right Upright. Make sure not to pinch the ground wire (C). If there is a screw (D) preattached to the Right Upright (84), remove and discard it.
Page 9: Upright (91), And Slide The Right Base Cover
5. Identify the Left and Right Base Covers (89, 90). Slide the Left Base Cover (89) onto the Left Upright (91), and slide the Right Base Cover (90) onto the Right Upright (84). Press the Base Covers downward, but do not snap the Base Covers into place yet.
Page 10 8. Attach the two Handrails (74) to the Right and Left Uprights (84, 91) with two 5/16" x 2" Screws (2) and two 5/16" Star Washers (8); do not fully tighten the Screws yet. Be careful not to pinch the Upright Wire (83) on the right side. Position the Upright Wire in the notch (F) as shown.
Page 11 10. IMPORTANT: To avoid damaging the Pulse Crossbar (80), do not use power tools, and do not overtighten the #10 x 3/4" Screws (6) or the 5/16" x 2" Screws (2). Orient the Pulse Crossbar (80) as shown. Attach the Pulse Crossbar with two 5/16" x 2" Screws (2), two 5/16"...
Page 12 12. Attach the console assembly (H) to the Handrails (74) with four 5/16" x 2" Screws (2) and four 5/16" Star Washers (8); start all four Screws, and then tighten them. Be careful not to pinch the wires (J). Insert the wires (J) into the top of the Right Upright (84).
Page 13 14. Set the Left Handrail Top Cover (73) on the left Handrail (74). Start four #8 x 3/4" Truss Head Screws (24) into the Left Handrail Bottom Cover (75), the left Handrail, and the Left Handrail Top Cover. Next, slide the Left Handrail Top and Bottom Covers forward against the console assembly (H) as shown.
Page 14 16. Remove the 5/16" Nut (9) and the 5/16" x 1 3/4" Bolt (3) from the bracket on the Base (93). Next, orient the Storage Latch (56) as shown. Attach the lower end of the Storage Latch (56) to the bracket on the Base (93) with the 5/16" x 1 3/4"...
Page 15 18. Firmly tighten the four 3/8" x 2 3/4" Screws (23) and the four 3/8" x 1 1/4" Screws (20). Then, slide the Left and Right Base Covers (89, 90) down until they snap into place. 19. Press the two tabs on the Tablet Holder (27) into the slots (O) in the console assembly (H).
Page 16: The Chest Heart Rate Monitor
THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR • Store the heart rate monitor in a warm, dry place. Do not store the heart rate monitor in a plastic bag or If the heart rate monitor looks like the one shown other container that may trap moisture.
Page 17: How To Use The Treadmill
HOW TO USE THE TREADMILL HOW TO PLUG IN THE POWER CORD Follow the steps below to plug in the power cord. This product must be earthed. If it should malfunc- 1. Plug the indicated end of the power cord into the tion or break down, earthing provides a path of least socket on the treadmill.
Page 18 CONSOLE DIAGRAM FEATURES OF THE CONSOLE In addition, the console features a selection of onboard workouts. Each workout automatically controls the The advanced treadmill console offers a selection of speed and incline of the treadmill as it guides you features designed to make your workouts more effec- through an effective exercise session.
Page 19 HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the treadmill has been exposed to The console features a tablet with a full-color touch cold temperatures, allow it to warm to room tem- screen. The following information will help you become perature before you turn on the power.
Page 20 HOW TO SET UP THE CONSOLE 5. Check for firmware updates. Before using the treadmill for the first time, set up the First, touch the profile button in the lower-right console. corner to select the settings main menu. Next, select the maintenance section. Then, touch the 1.
Page 21 HOW TO USE THE MANUAL MODE 4. Change the incline of the treadmill as desired. 1. Insert the key into the console. To change the incline of the treadmill, press the incline increase and decrease buttons or one of the See HOW TO TURN ON THE POWER on page numbered incline buttons.
Page 22 • Your pace To measure your heart rate, stand on the foot rails and hold the contacts with your palms for • The speed of the walking belt approximately ten seconds; avoid moving your hands. When your pulse is detected, your heart •...
Page 23 HOW TO USE A MAP WORKOUT When you reach the end of the workout, the walking belt will slow to a stop, and a workout 1. Insert the key into the console. summary will appear on the screen. After you view the workout summary, touch the Finish button to See HOW TO TURN ON THE POWER on return to the main menu.
Page 24 3. Draw your map. HOW TO USE A DISTANCE OR TIME WORKOUT Navigate to the area on the map where you want Note: To use a distance or time workout, the console to draw your workout by sliding your fingers on the must be connected to a wireless network (see HOW screen.
Page 25 6. Start the workout. HOW TO USE THE WORKOUT SETTINGS SECTION See step 4 on page 23. Note: During a distance or 1. Select the settings main menu. time workout, the display will not show a map. Insert the key into the console (see HOW TO 7.
Page 26 HOW TO USE THE EQUIPMENT SETTINGS HOW TO USE THE MAINTENANCE SECTION SECTION 1. Select the settings main menu. 1. Select the settings main menu. See step 1 on page 25. See step 1 on page 25. 2. Select the maintenance section. 2.
Page 27 4. Calibrate the incline system of the treadmill. Note: You must have your own wireless network and an 802.11b/g/n router with SSID broadcast Touch the Calibrate Incline button. Then, touch the enabled (hidden networks are not supported). Begin button to calibrate the incline system. The treadmill will automatically rise to the maximum When a list of networks appears, touch the desired incline level, lower to the minimum incline level,...
Page 28 HOW TO USE THE SOUND SYSTEM WITH AN HOW TO CONNECT AN HDMI CABLE AUDIO CABLE To show your console screen on a TV or monitor, plug To play music or audio books through the console an HDMI cable (not included) into the port on the con- sound system while you exercise, plug a 3.5 mm male sole and into a port on your TV or monitor;...
Page 29: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero before you fold the treadmill. Then, remove left.
Page 30: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes Regular maintenance is important for optimal perfor- as shown, the switch has tripped. To reset the mance and to reduce wear. Inspect and properly tighten power switch, wait for ﬁ...
Page 31 SYMPTOM: The displays of the console do not SYMPTOM: The treadmill will not connect to the function properly wireless network a. Remove the key from the console and UNPLUG a. Make sure that the wireless settings on the console THE POWER CORD. Next, remove the ﬁ ve #8 x are correct (see page 27).
Page 32 c. Your treadmill features a walking belt coated with SYMPTOM: The walking belt slips when walked on high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to a. First, remove the key and UNPLUG THE POWER the walking belt or the walking platform unless CORD.
Page 33: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
Page 34: Part List
PART LIST Model No. NETL20717.0 R0118A Key No. Qty. Description Key No. Qty. Description 5/16" x 3/4" Screw Drive Roller/Pulley 5/16" x 2" Screw Frame 5/16" x 1 3/4" Bolt 5/16" x 2 1/4" Bolt Drive Motor #8 x 3/4" Screw Motor Belt #10 x 3/4"...
Page 35 Key No. Qty. Description Key No. Qty. Description Right Tray Base Pad 3/8" Washer Hood Accent Hood Grill Reed Switch Key/Clip Reed Switch Clip Console Frame Cap Magnet Controller Clamp Console Frame Filter Cable Tie Ferrite Clamp M4 x 16mm Screw Motor Isolator Latch Crossbar –...
Page 36: Exploded Drawing
EXPLODED DRAWING A Model No. NETL20717.0 R0118A...
Page 37 EXPLODED DRAWING B Model No. NETL20717.0 R0118A...
Page 38 EXPLODED DRAWING C Model No. NETL20717.0 R0118A...
Page 39 EXPLODED DRAWING D Model No. NETL20717.0 R0118A...
Page 40: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...

NordicTrack Commercial 1750 User Manual

Quick Links

Related Manuals for NordicTrack Commercial 1750

Summary of Contents for NordicTrack Commercial 1750

Table of Contents