Routing Configuration Example - Extreme Networks Summit 300-48 Software User's Manual

IP Unicast Routing
Table 82: ICMP Configuration Commands (continued)
Command
enable ip-option use-router-alert
enable irdp {vlan <name>}
unconfig icmp
unconfig irdp

Routing Configuration Example

Figure 18 illustrates a Summit 300-48 switch with two VLANs defined as follows:
• Finance
— Contains ports 2 and 4.
— IP address 192.207.35.1.
• Personnel
— Contains ports 3 and 5.
— IP address 192.207.36.1.
Figure 18: Unicast routing configuration example
192.207.35.1
192.207.35.0
Finance
2 3
192.207.35.11
192.207.36.12
In this configuration, all IP traffic from stations connected to ports 2 and 4 have access to the router by
way of the VLAN Finance. Ports 3 and 5 reach the router by way of the VLAN Personnel.
202
Description
Enables the switch to generate the router alert
IP option with routing protocol packets.
Enables the generation of ICMP router
advertisement messages on one or all VLANs.
The default setting is enabled.
Resets all ICMP settings to the default values.
Resets all router advertisement settings to the
default values.
192.207.36.1
192.207.36.0
4 5
192.207.35.13
192.207.36.14
Personnel
EW_090
Summit 300-48 Switch Software User Guide