Using Extremeware Vista; Disabling Web Access - Extreme Networks Summit1 Installation And User Manual

U
SING
ExtremeWare
enables you to access the switch over a TCP/IP network, using a standard Web browser.
Any properly configured standard Web browser that supports frames (such as Netscape
Navigator 3.0 or Microsoft Internet Explorer 3.0) can manage the switch over a TCP/IP
network.
For more information on assigning an IP address, refer to
Parameters,"
The default home page of the switch can be accessed using the following command:
http://<ipaddress>
When you access the home page of the switch, you are presented with the Logon
screen.
For more information on using ExtremeWare Vista, refer to
D
ISABLING
By default, Web access is enabled on the Summit. To disable it, enter the following
command:
disable web
To re-enable Web access, enter the following command:
enable web
Reboot the switch in order for these changes to take effect.
For more information on rebooting the switch, refer to
S S I
UMMIT WITCH NSTALLATION AND
E W
XTREME ARE
™ Vista ™ is device-management software running in the Summit that
on page 3-12.
W A
EB CCESS
U G
SER UIDE
V
ISTA
U E W
SING XTREME ARE
"Configuring Switch IP
Chapter 13.
Chapter 14.
V
ISTA
3-17