Extreme Networks Summit1 Installation And User Manual page 103

D
ISPLAYING
To display VLAN settings, use the following command:
show vlan {<name> | all}
Sample output from this command is as follows:
show vlan all
VLAN Interface [1-fde] with name "net142" created by user
Tagging:
IP:
STPD:
Protocol
QoS Profile:
Ports:
LAN Interface [2-fdd] with name "net123" created by user
Tagging:
IP:
STPD:
Protocol
QoS Profile:
Ports:
The
show
the following:
• Name
• VLANid
• How the VLAN was created (manually or by GVRP)
• IP address
• STPD information
• Protocol information
• QOS profile information
• Ports assigned
S S I
UMMIT WITCH NSTALLATION AND
VLAN S
Untagged (Internal tag 4095)
Not configured
Domain "s0" is running spanning tree protocol.
AppleTalk = SNAP:809b SNAP:80f3
4.
Untag:
802.1Q Tag 1054
123.45.67.1/255.0.0.0
Domain "s0" is running spanning tree protocol.
Match all unfiltered protocols.
18.
Untag:
Tagged:
command displays summary information about each VLAN, and includes
U G
SER UIDE
ETTINGS
QP1
(Number of active port=4)
1 2 3 10
QP1
(Number of active port=6)
1 2 3 4 5 8
6 7 11 12 13 14 15 16 17 18
D VLAN S
ISPLAYING
9 10
ETTINGS
5-17