Deleting A Switch Account; Methods Of Managing The Summit - Extreme Networks Summit1 Installation And User Manual

D
ELETING A
To delete a switch account, you must have administrator privileges. Use the following
command to delete an account:
delete account <username>
M
ETHODS OF
You can manage the Summit using the following methods:
• Access the command-line interface by connecting a terminal (or workstation with
terminal-emulation software) to the Summit console port.
• Access the command-line interface over a TCP/IP network using a Telnet
connection.
• Access the Web interface over a TCP/IP network, using a standard Web browser
(such as Netscape Navigator™ 3.0 or greater, or Microsoft Internet Explorer™ 3.0 or
greater).
• Use an SNMP Network Manager over a network running the IP protocol.
The switch can support up to seven user sessions concurrently (for example, one
console port, one Web session, and five Telnet connections).
U
SING THE
The command-line interface built into the switch is accessible by way of the 9-pin,
RS-232 console port located on the rear of the unit.
For more information on the console port pin-outs, refer to
Once the connection is established, you will see the system prompt and you may log in.
S S I
UMMIT WITCH NSTALLATION AND
S A
WITCH CCOUNT
M
ANAGING THE
C I
ONSOLE NTERFACE
U G
SER UIDE
M
ETHODS OF
S
UMMIT
Chapter
M S
ANAGING THE UMMIT
2.
3-11