Extreme Networks Summit1 Installation And User Manual page 142

IP U R
NICAST OUTING
Table 9-1: Basic IP Commands (continued)
Command
disable bootp vlan [<name> | all]
config iparp add proxy <ipaddress> {<mask>}
{<mac_address>} {always}
config iparp delete proxy [<ipaddress> {<mask>} |
all]
disable bootprelay
disable ipforwarding {vlan <name> | all}
disable ipforwarding broadcast {vlan <name> | all}
disable multinetting
clear iparp [<ipaddress> <mask> | vlan <name> |
all]
clear ipfdb [<ipaddress> | vlan <name> | all]
9-12
Description
Disables the generation and processing of
BOOTP packets.
Configures proxy ARP entries. Up to 64
proxy ARP entries can be configured.
When <mask> is not specified, a how
address with the mask 255.255.255.255 is
assumed. When <mac_address> is not
specified, the MAC address of the switch
is used in the ARP Response. When
always is specified, the switch answers
ARP Requests without filtering requests
that belong to the same subnet of the
receiving router interface.
Deletes one or all proxy ARP entries.
Disables the forwarding of BOOTP
requests.
Disables routing for one or more VLANs.
Disables routing of broadcasts to other
networks.
Disables IP multinetting on the switch.
Removes dynamic entries in the IP ARP
table. Permanent IP ARP entries are not
affected.
Removes the dynamic entries in the IP
forwarding database.
S
UMMIT
S I U
WITCH NSTALLATION AND SER
G
UIDE